Industrial Hose Supplier in Saudi Arabia — Air, Steam, Water & Sand Blast Rubber Hose
FLEXI HOSE® industrial hoses are reinforced rubber hoses for compressed air, saturated steam, water transfer and abrasive blasting, in bores from 3/8 inch to 4 inch and working pressures from 10 BAR to 35 BAR. Manufactured by Vardhman Hydraulic Hoses Pvt. Ltd. and shipped factory-direct to Riyadh, Jeddah, Dammam, Jubail and Yanbu.
Shipping outside India? See our full hose export from India — Incoterms, export documentation and port of dispatch.
What Are Industrial Hoses?
Industrial hoses are reinforced rubber hoses that convey compressed air, steam, water, chemicals or abrasive media around a plant. Each type is defined by its tube compound, its reinforcement and a published working and burst pressure. Selecting the wrong type is the most common cause of hose failure in service.
Flexihose India manufactures ten industrial rubber hose families for the Saudi market. Three carry a BIS licence — Water Hose conforming to IS 444 Type 2 (CM/L No. 8400124510), Air Hose conforming to IS 446 Type 1 and Air Hose conforming to IS 446 Type 2 . Type 1 and Type 2 air hose are detailed on the Saudi air hose page. The rest are built to exceed their reference standards: Air/Rock Drill Hose exceeds IS 446 Type 3, Steam Hose exceeds IS 10655, and Sand Blast Hose exceeds IS 5894.
For Saudi Arabia, the two conditions that decide hose life are ambient heat and abrasive dust. Every FLEXI HOSE® cover compound is specified for ageing, ozone and abrasion resistance, and each product carries its own published service temperature — from −40 °C to +232 °C on two-wire braid steam hose down to −25 °C to +70 °C on water and Type 1 air hose. We supply Riyadh, Jeddah, Dammam, Jubail, Yanbu and the NEOM/Tabuk region factory-direct.
On This Page
Jump straight to the industrial hose information you need.
Industrial Hose Supplier in Saudi Arabia — Complete Product Range
Seven industrial rubber hose families covering pneumatic, steam, water and abrasive service. Air Hose Type 1 and Type 2 are covered in full on the Saudi air hose page. Every pressure figure is taken from the FLEXI HOSE® catalogue.
General purpose water hose for construction, engineering and irrigation. Double high tenacity synthetic textile yarn braids with an ageing and abrasion resistant cover.
Heavy duty compressor hose for industry, construction, shipyards, refineries and wagon tough operating conditions.
The highest pressure pneumatic hose in the range. Nitrile lining with a single braid of high tensile brass coated steel wire for open cast mining and quarrying.
Heat resistant EPDM lined saturated steam hose for refineries, shipyards, chemical plants, steel mills and foundries. One-wire and two-wire braid versions.
Extra thick seamless rubber lining free from mineral filler, DIN abrasion loss under 60 mm³. For blasting cast metal, stone and concrete with wet or dry abrasive.
White synthetic rubber lining with a green cover, for furnace coolant duty in the electrical and steel industries and other non-conductive applications.
UHMWPE translucent lining with helical steel wire reinforcement and a blue EPDM cover, for suction and discharge of chemicals, solvents and corrosive fluids.
Industrial Hose Technical Specifications — 1 Inch Bore Comparison
All eight industrial rubber hose types compared at 1 inch nominal bore. PSI and BAR pairs are published exactly as printed in the FLEXI HOSE® catalogue and are never recalculated.
| Hose Type | Mean O.D. | Working Pressure | Burst Pressure | Service Temperature | Standard | Best For |
|---|---|---|---|---|---|---|
| Water Hose | 35.00 mm | 145 PSI / 10 BAR | 435 PSI / 30 BAR | −25 °C to +70 °C | Conforming IS 444 Type 2 | Construction, irrigation |
| Air Hose 20 Bar | 36.00 mm | 300 PSI / 20 BAR | 900 PSI / 60 BAR | −30 °C to +80 °C | Exceeds IS 446 Type 2 | Shipyards, refineries |
| Air / Rock Drill Hose | 35.00 mm | 510 PSI / 35 BAR | 2040 PSI / 140 BAR | −30 °C to +80 °C | Exceeds IS 446 Type 3 | Open cast mining, quarries |
| Steam Hose (1-Wire Braid) | 35.50 mm | 145 PSI / 10 BAR | 1450 PSI / 100 BAR | −40 °C to +195 °C | Exceeds IS 10655 Type 2 | Refineries, steel mills |
| Steam Hose (2-Wire Braid) | 38.00 mm | 250 PSI / 17 BAR | 2500 PSI / 170 BAR | −40 °C to +232 °C | Exceeds IS 10655 Type 3 | High pressure saturated steam |
| Sand Blast Hose | 39.00 mm | 175 PSI / 12 BAR | 700 PSI / 48 BAR | −40 °C to +75 °C | Exceeds IS 5894 | Abrasive blasting, shipyards |
| Cable Coolant / Carbon Free | 37.00 mm | 250 PSI / 17.20 BAR | 1000 PSI / 69 BAR | −40 °C to +100 °C | Non-conductive service | Furnace coolant, steel plants |
| UHMWPE Chemical Hose | 36.80 mm | 240 PSI / 16 BAR | 720 PSI / 48 BAR | −20 °C to +120 °C | UHMWPE lined S&D | Solvents, corrosive fluids |
Standards referenced: IS 444, IS 446, IS 10655 and IS 5894 are Indian Standards published by the Bureau of Indian Standards. Saudi port information is published by Mawani, the Saudi Ports Authority.
Note: Figures are for the 1 inch nominal bore only. Working and burst pressures vary by bore across the 1/2 inch to 2 inch range (3/8 inch to 2 inch for Cable Coolant, 3/4 inch to 4 inch for UHMWPE). The two-wire braid steam hose is catalogued up to 1¼ inch. Request the full size table for the bore you need.
Industrial Hose Applications Across Saudi Arabia
Where FLEXI HOSE® industrial rubber hoses are specified in the Kingdom’s heaviest operating environments.
Refineries & Petrochemical
Steam hose exceeding IS 10655 for saturated steam lines and steam cleaning at Jubail, Yanbu and Rabigh, plus UHMWPE chemical and food grade hose for solvent and corrosive fluid transfer.
Shipyards & Marine
Sand blast hose exceeding IS 5894 for hull preparation and coating removal, and 20 bar air hose for shipyard compressor lines at Jeddah, Dammam and Jubail.
Mining & Quarrying
Air/Rock Drill hose exceeding IS 446 Type 3, rated 510 PSI / 35 BAR, for pneumatic rock drills and open cast operations across the Kingdom’s mining regions.
Construction & Mega Projects
Water hose conforming to IS 444 Type 2 and 20 bar air hose for site water transfer and pneumatic tools on infrastructure and NEOM-region construction packages.
Steel & Metal Fabrication
Cable coolant / carbon free hose for induction furnace cooling circuits, plus sand blast hose for mill scale removal and structural steel surface preparation.
Desalination & Water Infrastructure
Water hose and UHMWPE chemical hose for dosing lines, transfer duty and corrosive fluid handling at Saudi desalination and water treatment facilities.
Why Import Industrial Hose from Flexihose India?
What Saudi procurement teams, trading houses and EPC contractors get when they buy direct from the manufacturer.
BIS Licensed on Three Products
Water Hose (IS 444 Type 2, CM/L 8400124510), Air Hose Type 1 and Air Hose Type 2 (IS 446) are manufactured under a live BIS licence, not a self-declared claim.
NABL-Calibrated Test Equipment
Burst pressure, dimensional and material testing is carried out in our own R&D laboratory, with all test equipment calibrated by NABL-accredited bodies.
Full Standard Traceability
Each hose states whether it conforms to or exceeds its reference standard — IS 444, IS 446, IS 10655 or IS 5894 — so your inspection team can verify against the correct clause.
Factory-Direct Export Pricing
We are the manufacturer, not a trading house. Saudi buyers get FOB and CIF pricing without an intermediary margin, with volume terms available on annual rate contracts.
Complete Export Documentation
Every shipment carries commercial invoice, packing list, certificate of origin, bill of lading and test certificates for clearance at Saudi ports.
Four Product Families. One Manufacturer.
Industrial rubber hose is one of four families manufactured in-house at Bhiwadi, Rajasthan and exported to Saudi Arabia by Vardhman Hydraulic Hoses Pvt. Ltd.
SAE 100 and EN 856 hydraulic hoses for high pressure circuits, with working pressures up to 420 BAR on EN 856 4SP/4SH.
View Hydraulic Hoses (Saudi Arabia)Air, steam, sand blast, water and carbon free hoses built to IS 444, IS 446, IS 10655 and IS 5894.
You Are HereLarge bore 10 bar series for water, oil, chemical, bulk material and fly ash duty, in bores up to 8 inch.
- Water Suction & Discharge Hose
- Oil Suction & Discharge Hose
- Fly Ash / Bulk Material Hose
- Lay Flat Discharge Hose
- UHMWPE Chemical Hose
Annular corrugated stainless steel hose to EN ISO 10380, and SS PTFE Teflon hose rated −65 °C to +260 °C.
View Metallic & PTFE RangeReady to Import Industrial Hoses to Saudi Arabia?
Send your hose type, nominal bore, quantity and destination port. Our export team replies within 24 hours with FOB or CIF pricing, lead time and test certificates.
People Also Ask — Industrial Hose in Saudi Arabia
Short, direct answers to the questions Saudi buyers ask most about industrial rubber hose.
Which industrial hose should a Saudi shipyard specify for compressor lines?
Specify the FLEXI HOSE® Air Hose 20 Bar, which exceeds IS 446 Type 2. It is catalogued for compressors in industry, construction, shipyards, refineries and wagon tough operating conditions, rated 300 PSI / 20 BAR with a 900 PSI / 60 BAR minimum burst pressure and a −30 °C to +80 °C service temperature.
Which industrial hose has the highest working pressure?
Within the FLEXI HOSE® industrial rubber range, the Air/Rock Drill Hose has the highest working pressure at 510 PSI / 35 BAR, with a minimum burst pressure of 2040 PSI / 140 BAR. It exceeds IS 446 Type 3 and uses a single braid of high tensile brass coated steel wire.
What temperature can a steam hose handle?
The FLEXI HOSE® two-wire braid steam hose carries a service temperature of −40 °C to +232 °C and a working pressure of 250 PSI / 17 BAR. The one-wire braid version is rated −40 °C to +195 °C at 145 PSI / 10 BAR. Both use a heat resistant EPDM lining and cover.
Does “conforming to” mean the same as “exceeds”?
No. “Conforming to IS” means the hose is manufactured under a BIS licence to that standard — FLEXI HOSE® Water Hose and both Air Hose types. “Exceeds IS” means the hose is built beyond the standard’s minimum requirements but is not BIS licensed for it. The two are different claims.
What bore sizes are available for Saudi Arabia?
Most FLEXI HOSE® industrial rubber hoses are catalogued from 1/2 inch to 2 inch nominal bore. Cable Coolant / Carbon Free Hose starts at 3/8 inch, and the UHMWPE chemical and food grade hose runs from 3/4 inch to 4 inch. Sizes outside the published range are not catalogued — contact the export team.
Can I combine hose types in one container to Saudi Arabia?
Yes. Because all four product families are manufactured in the same plant, Saudi buyers can consolidate hydraulic, industrial rubber, suction and discharge, and stainless steel hoses into a single container and a single purchase order. LCL shipments can be arranged for trial orders.
Frequently Asked Questions — Industrial Hose for Saudi Arabia
Flexihose India, the FLEXI HOSE® brand of Vardhman Hydraulic Hoses Pvt. Ltd., supplies industrial hose to Saudi Arabia direct from its plant in Bhiwadi, Rajasthan. The industrial hose range covers seven families on this page, with Air Hose Type 1 and Type 2 detailed separately. Contact the export team on +91 9251554066 or mktg@flexihoseindia.com.
FLEXI HOSE® supplies Water Hose, Air Hose 20 Bar, Air/Rock Drill Hose, Steam Hose in one-wire and two-wire braid, Sand Blast Hose, UHMWPE Chemical & Food Grade Hose, and Cable Coolant / Carbon Free Hose to Saudi Arabia.
Three products carry a BIS licence: Water Hose Type 2 conforming to IS 444-2017 under CM/L No. 8400124510, Air Hose Type 1 conforming to IS 446-2017, and Air Hose Type 2 conforming to IS 446-2017 — both air hoses. All other FLEXI HOSE® industrial hoses are built to exceed their reference standards.
FLEXI HOSE® Water Hose, conforming to IS 444 Type 2, has a maximum working pressure of 145 PSI / 10 BAR and a minimum burst pressure of 435 PSI / 30 BAR across every catalogued bore from 1/2 inch to 2 inch. Service temperature is −25 °C to +70 °C.
Use FLEXI HOSE® Sand Blast Hose, which exceeds IS 5894. It has an extra thick seamless rubber lining free from mineral filler with a DIN abrasion loss under 60 mm³, a working pressure of 175 PSI / 12 BAR, and a service temperature of −40 °C to +75 °C. Never substitute a standard air hose for abrasive blasting.
Every industrial hose shipment to Saudi Arabia includes a commercial invoice, packing list, certificate of origin, bill of lading, and test certificates. Flexihose India offers FOB, CIF and CFR Incoterms from Nhava Sheva (JNPT) and Mundra Port.
Yes. Testing is carried out in the company’s in-house R&D laboratory, where all test equipment is calibrated by NABL-accredited bodies.
Sizes outside the published catalogue range are not standard products. If you need a bore that is not listed on this page, contact the Flexihose India export team on +91 9251554066 with your application, pressure and temperature requirement and we will confirm whether it can be manufactured.