EN ISO 10380 · AISI 304, 321, 316L

SS Flexible Hose Pipe, braided and corrugated, 6 to 150 mm

Flexihose makes SS flexible hose pipe in Bhiwadi, Rajasthan: an annular corrugated stainless steel hose, with or without a stainless steel wire braid, in fifteen sizes from 6 mm to 150 mm. Working pressure runs from 110 BAR at 6 mm to 10 BAR at 150 mm, with flanges and swivel fittings to your specification.

Industrial hose for pipework and equipment. Not a bathroom, tap or geyser connector.

SS flexible hose pipe with flanged ends, stainless steel braided over an annular corrugated tube, made by Flexihose India
Sizes
6 to 150 mm
Working pressure
110 BAR at 6 mm, braided
Bursting pressure
4 x working, every size
Tube grades
AISI 304, 321, 316L
Standard
EN ISO 10380
Made in Bhiwadi, Rajasthan In the hose industry since 1980, manufacturing since 1993 Ends to customer specification Delivered across India

What is an SS flexible hose pipe?

An SS flexible hose pipe is a thin stainless steel tube, formed into a series of separate rings (annular corrugations) so it can bend, usually covered with a braid of stainless steel wire and finished with metal end fittings. It joins two points in a pipeline or connects equipment where a rigid pipe may not cope: where there is vibration, thermal movement, a planned offset or a part that moves.

Buyers also call it an SS hose pipe, a stainless steel flexible hose, a metal hose or an SS bellow hose. Flexihose makes it to EN ISO 10380, the international standard for corrugated metal hoses and hose assemblies, in AISI 304, 321 and 316L, from 6 mm to 150 mm.

The corrugated tube contains the medium. The braid carries the pressure load. Unlike rubber, the wall is metal all the way through, so there is no lining to age or swell in contact with oils and solvents. That is why it is specified for process lines, pump and compressor connections, and other fixed metal lines.

How it is built: tube, braid and ends

Three parts, each chosen for the duty, explained further in what an SS flexible hose is. Our catalogue describes the structure as an annular corrugated flexible metal hose, produced from longitudinally welded tubes corrugated mechanically, with or without braiding.

Cutaway of a stainless steel flexible hose: corrugated tube, wire braid and flanged end Side view. On the left the annular corrugated stainless steel tube is exposed. In the middle a stainless steel wire braid covers the tube. On the right a flanged end connection is welded on. Numbered markers: 1 corrugated tube, 2 wire braid, 3 end fitting. 1 2 3 Annular corrugated tube Stainless steel wire braid Flanged end
  1. 1
    Annular corrugated tubeLongitudinally welded stainless steel tube, corrugated mechanically into separate rings. AISI 304, 321 or 316L.
  2. 2
    Stainless steel wire braidOptional. AISI 304 or 316L wire, braided over the tube to carry pressure thrust and protect the corrugations.
  3. 3
    End fittingThreaded ends or welded connections. Flanges and swivel fittings to your specification.
How a stainless steel flexible hose is built. Drawing is schematic, not to scale.

Annular, not helical

Each corrugation is a separate closed ring, not a continuous spiral. The types of metal hose guide compares the forms.

Welded, then corrugated

Our catalogue describes longitudinally welded tubes, corrugated mechanically.

Braid in 304 or 316L

Braid wire is AISI 304 or 316L. The braid takes the pressure thrust that would otherwise stretch the corrugations, and shields them from knocks.

SS braided hose pipe or SS corrugated hose: which do you need?

Both start as the same corrugated tube. The braid is the difference, and it decides what pressure the hose can carry. SS braided vs corrugated hose goes deeper.

Tube + wire braid
For pressure lines

SS braided hose pipe

The corrugated tube with a stainless steel wire braid over it. We read every pressure figure in our table as being for this construction, because the catalogue lists the braid wire, wire count and coverage alongside each pressure.

  • Working pressure from 110 BAR (6 mm) to 10 BAR (150 mm)
  • Braid coverage from 87.00 % to 97.20 %, depending on size
  • Also sold as SS wire braided hose pipe
Tube only, no braid
For low pressure and movement

SS corrugated hose (unbraided)

The bare annular corrugated tube with no braid. Lighter and more flexible, and often called an SS bellow hose or SS corrugated hose pipe in India.

  • Suits low pressure, vacuum and movement compensation
  • Sizes confirmed on enquiry
  • Ask about the pressure rating for your size

Under pressure, choose braided. Without a braid, internal pressure pushes the corrugations apart and the hose grows in length. Our catalogue table lists braid data beside each pressure, so we read the pressures on this page as braided figures. For an unbraided hose, ask about the rating for your size.

SS flexible hose pipe sizes and pressure, 6 mm to 150 mm

Choose a size to see its pressures, braid and bend radius. The figures come from our product catalogue table for that size.

Pick a nominal size. The figures below come from our catalogue table for that size.

25 mm braided SS hose pipe

Outside diameter 32.4 mm. Pressures in BAR.

Working pressure45 BAR
Test pressure75 BAR
Bursting pressure180 BAR
Corrugations per metre
294
Braid wires
7
Braid coverage
94.60 %
Braid wire thickness
.30
Minimum bend radius for the selected size, static and flexing, drawn to the same scale bend centre
Bend radius, static (S)
80 mm
Bend radius, flexing (F)
205 mm
Blue: installed once and left. Grey: moves, vibrates or sees pressure pulses. Both arcs share one scale across all sizes.

SS flexible hose pipe specification table

The full braided range in one table, with notes on reading it in our SS flexible hose size chart. Use the size anchor (for example 25 mm) to share a row with your team.

SS flexible hose pipe, read as braided figures, as printed in the FLEXI HOSE Product Catalogue 2026-2027. Pressures in BAR, bend radius in mm.
Size (mm)O.D. (mm)Corrugations / mBraid wire thicknessNo. of wiresBraid coverage (%)Bend radius S (mm)Bend radius F (mm)Working (BAR)Test (BAR)Bursting (BAR)
69.5480.25697.102585110170440
812.1440.25795.2032135100150400
1014.2380.25896.303814590130360
1216.7305.25995.004514580120320
1621.4275.301197.205516570105280
2026.3272.301095.50651756095240
2532.4294.30794.60802054575180
3241.1273.35893.101002654060160
4049.2140.35992.001303053550140
5063.4110.401095.201603253045120
6580.5107.401094.50180420243596
8094.892.401093.40200450182572
100116.485.501091.00280560162264
12515072.571088.20320730142056
15017269.571287.00380820101540

Pressure columns are BAR. The catalogue prints bend radius without a unit; millimetres is the only reading that fits the sizes. Braid wire thickness is printed without a unit and is shown as printed. S is the minimum radius for a static bend, F for a hose that moves, vibrates or sees pressure pulses in service.

Why pressure rating falls as size rises

A larger bore puts more force on the wall and braid at the same pressure, so its rated working pressure is lower. At 6 mm the rating is 110 BAR; at 150 mm it is 10 BAR. Test pressure is about 1.5 times working and bursting pressure is 4 times working at every size, which gives the same margin across the range.

Working pressureBursting pressure

  1. 6 mm110 / 440 BAR
  2. 8 mm100 / 400 BAR
  3. 10 mm90 / 360 BAR
  4. 12 mm80 / 320 BAR
  5. 16 mm70 / 280 BAR
  6. 20 mm60 / 240 BAR
  7. 25 mm45 / 180 BAR
  8. 32 mm40 / 160 BAR
  9. 40 mm35 / 140 BAR
  10. 50 mm30 / 120 BAR
  11. 65 mm24 / 96 BAR
  12. 80 mm18 / 72 BAR
  13. 100 mm16 / 64 BAR
  14. 125 mm14 / 56 BAR
  15. 150 mm10 / 40 BAR
Working against bursting pressure for every size, bar length to one scale. Bursting is four times working at every size.

Tube grade: SS 304, SS 321 or SS 316L flexible hose

The tube is made in three austenitic stainless steels. The braid is made in AISI 304 or 316L. Pick the tube grade by the medium and the duty; we confirm the choice when you send your enquiry. SS 304 vs 321 vs 316L explains the differences.

AISI 304

The general choice

Chromium-nickel stainless steel. Usually chosen for water, air, oils and general lines where chlorides are low.

  • TubeYes
  • BraidYes

AISI 321

Titanium stabilised

304-type steel stabilised with titanium. Considered where intergranular corrosion after heating is the concern. Its service temperature is not published, so give us your temperature.

  • TubeYes
  • BraidNo

AISI 316L

Chlorides and chemicals

Molybdenum-bearing, low-carbon stainless steel. Usually considered first for chlorides and more aggressive chemical media. Better than 304, not immune: seawater and hot chlorides need an engineering review.

  • TubeYes
  • BraidYes

SS hose fittings and end connections

A metal hose is only as good as its ends. We supply threaded ends and welded connections, and make flanges and swivel fittings to your specification. See SS hose end fittings.

Threaded ends

For screwed pipework and equipment ports. Tell us the thread form and size.

Welded connections

For permanent joints in process pipework. Tell us the size and end preparation.

Flanges

Made to customer specification. Tell us the flange standard, class and size.

Swivel fittings

Made to customer specification. They reduce the risk of twisting the hose. Still hold the hose side with a backup wrench.

SS braided hose pipes with threaded hexagon end fittings, stainless steel wire braid, Flexihose India
Threaded-end SS braided hose pipe. On a braided hose, the end joint is part of the pressure system, because the braid carries its load to the fittings. Send the fitting type at each end, the size and the length between ends, and we quote the assembly.

How to specify an SS flexible hose pipe

Send these six things and we can quote without a second round of questions.

  1. Size and lengthNominal size from 6 mm to 150 mm, and the overall length between end faces.
  2. Pressure and temperatureWorking pressure, any surge, and the operating temperature. We check that duty with the works.
  3. MediumWhat flows through the hose. This decides the tube grade: 304, 321 or 316L.
  4. Braided or unbraidedBraided for pressure. Unbraided for low pressure, vacuum or movement compensation.
  5. Static or flexingInstalled once, or moving, vibrating or pulsing in service. This sets which bend radius applies: S or F.
  6. EndsThreaded, welded, flanged or swivel, with the standard and size at each end.

Where stainless steel flexible hose is used

A metal hose solves movement problems in metal pipework. These are typical duties. More in where SS flexible hoses are used.

Vibration isolation

At pump, compressor and engine connections, where vibration can fatigue a rigid pipe or its welds.

Thermal movement

Where a line grows and shrinks as it heats and cools, and needs a flexible section to take the movement.

Offset connections

A planned offset between two fixed points, with the hose installed for it. Not a fix for bolt holes that do not line up.

Process and chemical lines

Chemical, pharmaceutical, oil and gas, and HVAC plant, where a metal wall is preferred to rubber. Tell us the medium for grade selection.

SS flexible hose vs PTFE hose vs rubber hose

Three different answers to "I need a flexible line". Pick by the medium, the pressure and how the hose has to move. Stainless steel vs rubber vs PTFE hose compares them in full.

 SS flexible hose pipeSS PTFE Teflon hoseRubber hose
WallCorrugated stainless steel, optional SS braidSS PTFE Teflon hose, as the catalogue names itRubber tube and cover, textile or wire reinforcement
Size range6 mm to 150 mm1/8" to 2" (3.5 mm to 50 mm)By product
Highest working pressure in range110 BAR, at 6 mm3625 PSI / 250 BAR, at 1/8"By product
Published service temperatureNot published-65 C to +260 CBy product
Best atMovement and vibration in metal pipeworkSmall bores, chemicals, high temperatureHoses that are handled, moved and coiled
SeeThis pagePTFE Teflon hoseSteam hose, hydraulic hose

SS hose pressure is printed in BAR only in our catalogue, so no PSI figure is given for it. PTFE figures are the catalogue's printed PSI and BAR pair.

What this hose is not for

  • Bathroom, tap, geyser and washing machine connectors. Those are short consumer connectors, a different product, and they are not in our catalogue.
  • Pressure lines without a braid. We read the published pressures as braided figures. An unbraided hose under pressure stretches. Ask us before using one on a pressure duty.
  • Twisting. A metal hose must bend, not twist. Torsion during fitting is a common cause of early cracking. Hold the hose side with a backup wrench when tightening, even with a swivel end. Our metal hose installation guide covers the rest.
  • Misaligned flanges. Do not use the hose to force two flanges together. Correct the alignment first.
  • Bends tighter than the published radius. Respect bend radius S for a fixed installation and bend radius F for a hose that moves, vibrates or sees pressure pulses. Both are in the table above.
  • An unstated temperature. Our catalogue does not print a service temperature for this hose. Give us the operating temperature so that we can check it with the works.

Why buy from Flexihose

Made in Bhiwadi

Vardhman Hydraulic Hoses Pvt. Ltd., F-621, Phase-1, RIICO Industrial Area, Bhiwadi, Rajasthan. In the hose industry since 1980, manufacturing since 1993.

Numbers you can check

Every size, pressure and braid figure on this page comes from our product catalogue, and the unit notes are stated beside the table.

Ends to your specification

Three tube grades, braided or unbraided, and threaded, welded, flanged or swivel ends. Flanges and swivel fittings are made to customer specification.

Get a quote for SS flexible hose pipe

Send your size, length, grade, ends and duty. We reply with a written quote. Our price guide explains what moves a quote, and our HSN code guide covers the tax paperwork.

  1. Size (6 mm to 150 mm) and length
  2. Braided or unbraided
  3. Tube grade, or the medium
  4. End fittings at each end
  5. Working pressure and temperature
  6. Quantity and delivery city

Delivered across India, including Delhi-NCR, Mumbai, Pune, Chennai, Ahmedabad, Kolkata, Hyderabad and Bengaluru.

SS flexible hose pipe: frequently asked questions

What is an SS flexible hose pipe?

An SS flexible hose pipe is a stainless steel tube, corrugated into rings so it can bend, usually covered with a stainless steel wire braid and fitted with metal ends. It connects pipework or equipment where a rigid pipe cannot take movement or vibration. Ours are made to EN ISO 10380 in AISI 304, 321 or 316L, from 6 mm to 150 mm.

What is SS hose?

SS hose is short for stainless steel hose. In industry it usually means an SS flexible hose pipe: an annular corrugated stainless steel tube, with or without a wire braid, and metal end fittings. It is not the same as a plastic hose with a steel-look cover.

Which is better, braided or corrugated SS hose?

Neither is better in every case. A braided SS hose pipe carries the pressures in our catalogue table and protects the corrugations from damage. An unbraided corrugated hose is lighter and more flexible, and suits low pressure duties, vacuum and movement compensation. If the line is under pressure, choose braided. For an unbraided pressure rating, ask us for your size.

What is an SS bellow hose?

SS bellow hose is a common trade name in India for an annular corrugated stainless steel hose. The rings of the corrugation look like a bellows, which is where the name comes from. It is the same product family as the hose on this page. A separate bellows expansion joint is a different, usually short and large-bore, component.

What is the pressure rating of SS braided hose pipe?

It depends on the size. Our catalogue table, read as braided figures, runs from 110 BAR working pressure at 6 mm down to 10 BAR at 150 mm. Test pressure is about 1.5 times working and bursting pressure is 4 times working at every size. The full table is on this page.

Should I choose SS 304 or SS 316L flexible hose?

AISI 304 is the general choice for water, air and many process lines. AISI 316L contains molybdenum and is usually considered first where chlorides or more aggressive chemicals are present, though it is not immune. AISI 321 is titanium stabilised and is considered where intergranular corrosion after heating is the concern. Tell us the medium and we will confirm the grade.

What sizes do you make?

Fifteen nominal sizes from 6 mm to 150 mm: 6, 8, 10, 12, 16, 20, 25, 32, 40, 50, 65, 80, 100, 125 and 150 mm. Give the length you need on your enquiry.

What end fittings can you supply?

Threaded ends and welded connections, plus flanges and swivel fittings made to your specification. Send the end type, size and standard, or a drawing, with your enquiry.

Can I use this for a bathroom tap or geyser connection?

No. This is an industrial hose for pipework and equipment. The short braided connectors sold for taps, geysers and washing machines are a different consumer product, and they are not in our catalogue.

What temperature can an SS hose pipe handle?

Our catalogue does not print a service temperature for this hose, so we do not publish one. Tell us the operating temperature and pressure with your enquiry so that we can check that duty with the works.