Home/ Blog/ SS hose/ Which HSN Code Applies to SS Braided Hose, and What GST Is Charged?

Which HSN Code Applies to SS Braided Hose, and What GST Is Charged?

Published November 6, 2026 · Updated November 21, 2026

SS hose · HSN code and GST

The HSN code for SS braided hose: 8307.10, and how to read it

For stainless steel flexible hose, the material decides the heading, not the word “braided”. Here is how to read it before you raise an invoice or a shipping bill.

  1. Chapter 83Miscellaneous articles of base metalSteel is a base metal.
  2. Heading 83.07Flexible tubing of base metalWith or without fittings.
  3. Subheading 8307.10Of iron or steelStainless steel falls here. 18% GST.
Three steps, and each one uses a single fact about the hose.

Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm

Quick answer

SS flexible hose, braided or unbraided, falls under HS heading 83.07, flexible tubing of base metal, with or without fittings. Being steel, it takes subheading 8307.10. Under Notification 9/2025-Integrated Tax (Rate), heading 8307 is in Schedule II at 18% IGST from 22 September 2025. Confirm the eight-digit tariff item with your customs broker or chartered accountant before filing.

A purchase order for SS flexible hose pipe needs a code as well as a size, and marketplace listings are not a reliable place to get one. So here are the primary sources. This guide follows the same approach as our HSN code guide for steam hose, which covers rubber hose.

Scope note: this is not tax advice. We are a hose manufacturer, not a customs broker or chartered accountant. The heading and rate below come from the WCO Harmonized System nomenclature and the CBIC-issued GST notification as we read them on 5 November 2026. Classification of a specific shipment, the eight-digit tariff item, export benefits and invoice treatment must be confirmed by your own adviser.

The HSN code for SS braided hose

India’s HSN follows the international Harmonized System for its first six digits, so a GST invoice and a shipping bill start from the same place. For stainless steel hose, that place is WCO HS 2022, Chapter 83: heading 83.07, flexible tubing of base metal, with or without fittings. Subheading 8307.10 covers tubing of iron or steel. 8307.90 covers other base metals.

How the code applies to the SS hoses people ask about.

HoseHeadingSubheadingWhat decides it
SS braided hose83.078307.10Flexible tubing of steel
SS corrugated hose, no braid83.078307.10Same: the braid does not change it
SS hose with fittings83.078307.10The heading already covers “with or without fittings”
SS PTFE Teflon hose39.17Depends on burst pressurePTFE is a plastic. Confirm with your broker

Headings from WCO HS 2022 Chapter 83 and Chapter 39.

Note the contrast with rubber. Rubber hose reinforced only with metal splits by fittings: 4009.21 without, 4009.22 with. Metal hose does not, because its heading covers both. For how these hoses differ physically, see stainless steel vs rubber vs PTFE hose and SS braided vs corrugated hose.

GST rate on SS flexible hose

The current goods rate notification is Notification 9/2025-Integrated Tax (Rate), dated 17 September 2025 and in force from 22 September 2025. Heading 8307 is at Schedule II, serial number 381, “flexible tubing of base metal, with or without fittings”, and Schedule II carries 18% integrated tax. On an intra-state invoice, that normally appears split between CGST and SGST.

Rates change, so check the current notification when you file. We read the entry on 5 November 2026.

Export paperwork notes

Importing countries share the first six digits and add their own after that, so an overseas buyer should confirm their own national code. The description matters as much as the number: keep it the same on every document, and use the words the heading uses, such as “flexible tubing of stainless steel”. Our standard export document set is the commercial invoice, packing list, certificate of origin, bill of lading and test certificates, listed on our hose exporter in India page.

Giving your broker the grade, size and the end fitting details up front saves a round of questions. The size chart has the technical data they may ask for.

Mistakes to avoid

  • Using a rubber hose code. “Hose” on an invoice does not mean heading 40.09. The material decides.
  • Copying a marketplace listing. Listings often use a seller’s habit rather than the tariff.
  • Describing a bathroom connector and an industrial hose the same way. Describe what is actually being sold.
  • Assuming the code from your last supplier. Check it against the tariff, and with your adviser.

Confirm it, then keep it consistent

Take 8307.10 and the 18% rate to your broker or CA, have them confirm the eight-digit item, and use the same description everywhere. For the hose itself, send size, grade, length and ends for our SS flexible hose pipe. If you are budgeting, our price guide explains what moves a quote. New to the product? Read what an SS flexible hose is.

↑ Back to top

FAQ

What is the HSN code for SS braided hose?

SS braided hose falls under heading 83.07, flexible tubing of base metal, with or without fittings. Being steel, it takes subheading 8307.10. Confirm the eight-digit tariff item with your customs broker or chartered accountant.

What is the GST rate on SS flexible hose?

Heading 8307 is listed at Schedule II, serial number 381, of Notification 9/2025-Integrated Tax (Rate), which carries 18% integrated tax from 22 September 2025. Check the current notification when you file.

Does the HSN code change if the hose has fittings?

Not for stainless steel hose, because heading 83.07 already covers flexible tubing with or without fittings. This differs from metal-reinforced rubber hose, where the subheading changes when fittings are attached.

Is unbraided SS corrugated hose under the same code?

It is flexible tubing of steel as well, so it falls under the same subheading, 8307.10. The braid does not move it to a different heading.

What is the HSN code for SS PTFE Teflon hose?

PTFE is a plastic, and tubes and hoses of plastics fall under heading 39.17, where the subheading depends on burst pressure, reinforcement and fittings. Where a hose also carries a steel braid, ask your broker to confirm the heading.

PS

Pushkar Singh

Digital Marketing Lead, Vardhman Hydraulic Hoses Pvt. Ltd.

Pushkar Singh is Digital Marketing Lead at Vardhman Hydraulic Hoses Pvt. Ltd. (Flexihose India), where he has worked for over a year and a half.

More about the author

Have a question this guide didn't answer?

Send us your bore size, pressure and application and we'll recommend the right hose.