Home/ Blog/ SS hose/ How Much Does an SS Flexible Hose Pipe Cost in India, and Why Do Quotes Differ?

How Much Does an SS Flexible Hose Pipe Cost in India, and Why Do Quotes Differ?

Published November 6, 2026 · Updated November 21, 2026

SS hose · Price and quotes in India

What an SS flexible hose pipe costs in India, and why quotes differ

Marketplace listings differ by more than thirty times per metre. Much of that gap comes from six choices that change what you are actually buying.

Per-metre listing prices on IndiaMART on 5 November 2026Eleven per-metre listings from ₹100 to ₹3,500 per metre on a log scale, with a median of ₹300.₹100₹300₹1,000₹3,500Median ₹300 per metreEach dot is one listing. The scale is logarithmic.
Public listings, not Flexihose prices. They mix sizes, grades and constructions, which is the point of this guide.

Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm · every enquiry quoted in writing

Quick answer

IndiaMART’s stainless steel flexible hose category, read on 5 November 2026, showed per-metre listings from ₹100 to ₹3,500 with a median of ₹300, and per-piece listings from ₹70 to ₹14,500. Those listings mix sizes, grades and consumer connectors. Six choices move a real quote: size, grade, braid, end fittings, length and paperwork. Two quotes only compare when all six match.

We do not publish a price list for our SS flexible hose pipe. Every enquiry is quoted in writing, because the price depends on size, grade, braid, ends and length, and a single rupee figure would hide all five. What we can do is show what public listings say today, explain why two quotes for “25 mm SS hose” can be many times apart, and set out how to ask for quotes you can compare.

What SS flexible hose listings show today

On 5 November 2026 we read the first page of IndiaMART’s stainless steel flexible hose category and counted the 36 prices shown.

What the first page showed. Third-party listing prices, not our prices.

UnitListingsLowestMedianHighest
Per metre11₹100₹300₹3,500
Per piece25₹70₹1,000₹14,500

Read in a browser from India on 5 November 2026. Listings change daily, and they may exclude GST and freight.

Treat these as a picture of the market, not a price guide. The per-piece figures show the biggest trap: a ₹70 piece and a ₹14,500 piece are not the same product at different margins. Some low-priced pieces are short connectors of the bathroom kind, which share the name but are a different product. See what an SS flexible hose is.

Six things that change the price

Each of these changes what you are buying.

  • 1. SizeBigger bore, more metalThe range runs from 6 to 150 mm, and the tube and the braid both grow with it. Our size chart shows the jump in outside diameter.
  • 2. Grade304, 321 or 316L316L carries molybdenum and more nickel, per Outokumpu. Our grade guide covers when it is worth paying for.
  • 3. BraidBraided or unbraidedA braid adds wire and a process step. It is also what carries the pressure, as this guide explains.
  • 4. EndsThreaded, welded, flanged, swivelOften a large part of a short assembly’s price. See SS hose end fittings.
  • 5. LengthPer metre vs made to lengthA short assembly carries the cost of two ends over very little hose, so its per-metre figure looks high.
  • 6. PaperworkCertificates and inspectionTest certificates and any third-party inspection belong in the comparison.

Why a cheap hose can cost more

A low price can be perfectly honest, because it may be a smaller size or a plainer grade. The risk comes from what is not stated. A listing that gives no grade, no braid details and no pressure leaves you to find out at the failure. A wall or a braid lighter than your duty needs, or a 304 tube near chlorides, can fail long before the saving is worth it, and the shutdown can cost more than the hose.

So compare on the numbers. For any size, a serious supplier should be able to state the working, test and bursting pressure and the bend radius. Ours are all printed in the SS flexible hose size chart. Many early failures also come down to fitting, so the metal hose installation guide can save more than a lower quote.

How to get a like-for-like quote

Send the same six lines to every supplier.

LineWrite downExample format
SizeNominal size25 mm
GradeTube and braidTube 316L, braid 316L
ConstructionBraided or unbraidedBraided
EndsType, size and standard, for each endEnd A flange, End B thread
Length and quantityOverall length, how manyLength over fittings, 10 pieces
TermsTax, freight, documentsEx-works or delivered, GST shown, test certificate

Ask each supplier to state GST and freight separately, so the totals compare. GST on this hose is covered in the HSN code guide, and the rate itself is in Notification 9/2025-Integrated Tax (Rate). And check that a metal hose is the right family at all: stainless steel vs rubber vs PTFE hose and types of metal hose help there, and where SS flexible hoses are used lists the usual duties.

Ask for a written quote on the same six lines

Send us the six lines and we will quote in writing for our SS flexible hose pipe. Test certificates are supplied with every consignment. If you are still choosing, the guides above will help you fill in each line.

↑ Back to top

FAQ

What is the price of an SS flexible hose pipe in India?

IndiaMART's category page, read on 5 November 2026, showed per-metre listings from ₹100 to ₹3,500, with a median of ₹300. Those mix sizes, grades and constructions, so they do not tell you the price for your specification. Ask for a written quote.

How much does a 1 metre SS hose cost?

It depends on size, grade, braid and ends, and a one-metre assembly carries the full cost of two end fittings. Listings for individual pieces ran from ₹70 to ₹14,500 on the day we read them, which shows how little a generic figure tells you.

Why are some SS flexible hoses so cheap?

Sometimes because they are a different product. Short bathroom and geyser connectors share the name but are small consumer parts. Others may be smaller, in a plainer grade, or sold with no stated pressure rating.

Does Flexihose publish an SS hose price list?

No. Every enquiry is quoted in writing, because the price depends on size, grade, braid, ends and length. Send those details and we will quote for your specification.

Is SS 316L hose more expensive than SS 304?

Generally yes, because 316L contains molybdenum and more nickel. Compare complete quotes for the same size, braid and ends, since those can move the price as much as the grade.

PS

Pushkar Singh

Digital Marketing Lead, Vardhman Hydraulic Hoses Pvt. Ltd.

Pushkar Singh is Digital Marketing Lead at Vardhman Hydraulic Hoses Pvt. Ltd. (Flexihose India), where he has worked for over a year and a half.

More about the author

Have a question this guide didn't answer?

Send us your bore size, pressure and application and we'll recommend the right hose.