Home/ Blog/ SS hose/ Where Are SS Flexible Hoses Used, and What Problems Do They Solve?

Where Are SS Flexible Hoses Used, and What Problems Do They Solve?

Published November 6, 2026 · Updated November 21, 2026

SS hose · Applications

Where SS flexible hoses are used: it comes down to movement

A rigid pipe that moves, or sits next to something that moves, eventually cracks. A short length of metal hose takes that movement. Most uses are a version of that one idea.

A pump vibrating while a flexible hose takes the movement before the anchored rigid lineA pump on the left shakes. A braided flexible hose connects it to a rigid pipe on the right. The hose takes the movement so that less reaches the anchored pipe. Vibration at the pumpHose takes the movementRigid line, anchored
A common use: reducing the vibration that reaches a rigid, anchored line. Drawing is schematic.

Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm

Quick answer

SS flexible hoses are used where rigid metal pipework meets movement: isolating vibration at pumps and compressors, taking thermal movement, and making offset connections to equipment. Manufacturers also list them in HVAC, oil and gas, chemical, food, shipbuilding and machinery work. The movement should reach the hose sideways. Avoid twist, and avoid pushing or pulling along its length.

Buyers rarely search for a metal hose out of curiosity. Something cracked, or a drawing asks for one. This guide lays out the duties SS flexible hose pipe is bought for, and just as usefully, the duties it should not be asked to do.

Temperature. Our catalogue prints no service temperature for this hose, so this guide gives none. If your duty is hot or very cold, tell us the temperature so that we can check it with the works. For steam, start with our steam hose page and the best pipe for a steam line guide.

The three problems it solves

Most uses of a metal hose fall under one of these.

  • VibrationIsolating a machine from the lineAt pump, compressor and engine connections, where vibration would otherwise fatigue a rigid pipe or its welds.
  • Thermal movementLetting a hot line growUsed with proper anchors, usually arranged so the movement reaches the hose sideways rather than along its length.
  • OffsetConnecting across a fixed gapJoining two connection points that are not in line, or a piece of equipment that needs to be moved for service.

In all three, the hose is a short section inside a metal system, not a replacement for the line. If your line needs a hose that people move and coil every day, stainless steel is usually the wrong family, as stainless steel vs rubber vs PTFE hose explains.

The movement has to be the right kind

This is where most misuse starts. Flexline’s selection and installation notes state that the pipe motion must be perpendicular to the hose’s centre line, and that twisting causes failure.

Which movements a metal hose can takeSideways offset, at right angles to the hose axis, is what a metal hose is designed for. Pushing or pulling along its axis, and twisting it, are not.Sideways, at right anglesPushed along its lengthTwisted
Sideways movement is the job. Compression along the axis and twist are what shorten a metal hose’s life.

The same notes warn against using a metal hose to compensate for bolt-hole misalignment. So “offset” here means a planned offset with the hose installed for it, not forcing a hose between two flanges that do not meet. Our metal hose installation guide shows how to get this right on site.

Where you will find it

BOA Group’s metal hose guide lists heating, plumbing and air conditioning, oil and gas, chemical and food, machine and equipment building, shipbuilding, railway and automotive work among the uses of metal hose. In practice, the job within each sector is usually one of these:

Typical duties, and what to tell the supplier for each.

DutyTypical locationWhat to check
Pump and compressor connectionsSuction or discharge side of the machineLength, because the hose needs enough live length to take vibration
Process and chemical transfer linesFixed plant pipeworkThe medium, which decides the tube grade
HVAC and building servicesChiller and equipment connectionsPressure, and how the hose is supported
Gas linesEquipment connectionsThe medium and any standard your project requires
Marine and coastal plantAnywhere with salt airGrade: 316L is better than 304 with chlorides, not immune

Those are typical examples, not a list of approvals. If your application needs a specific code or authority approval, tell us at the enquiry stage so we can say plainly whether we can meet it.

When it is the wrong choice

  • Taps, geysers and washing machines. Those use short consumer connectors, which are not in our catalogue.
  • A hose people drag around. Corrugated metal hose is installed and left. Rough handling damages it.
  • Taking up a badly fitted flange. Fix the alignment. Don’t ask the hose to do it.
  • Large axial movement. Movement along the length of the line is a job for other components. Ask before using a hose for it.

Once you know a hose fits, three things finish the specification: braided or unbraided, the size and pressure and the end fittings.

Describe the movement on your enquiry

Tell us what moves, in which direction and how often, along with size, pressure and medium. That lets us check the length as well as the rating for your SS flexible hose pipe. New to the product? Start with what an SS flexible hose is.

↑ Back to top

FAQ

What are the uses of flexible hoses?

Flexible hoses connect points that move or do not line up. Stainless steel flexible hose is used mainly for vibration isolation at pumps and compressors, thermal movement and offset connections in fixed metal pipework.

What is SS flexible hose used for?

It is used as a short flexible section in metal pipework: at pump and compressor connections, in process and chemical lines, in HVAC plant and at equipment connections. It takes movement that would otherwise crack a rigid pipe.

What is 304 stainless steel pipe used for in a hose?

AISI 304 is the general-purpose tube grade, usually chosen for water, air and oils where chlorides are low. Where chlorides are present, 316L is usually considered first, though it is not immune.

Can SS flexible hose be used for misaligned flanges?

It should not be used to force two misaligned flanges together. Flexline's notes warn specifically against using metal hose to compensate for bolt-hole misalignment. Correct the alignment, or design the offset into the installation.

Can SS flexible hose be used on a steam line?

Our catalogue prints no service temperature for SS flexible hose, so a steam duty has to be checked case by case. Send the steam pressure and temperature. Our steam hose page and steam guides cover the rubber options.

PS

Pushkar Singh

Digital Marketing Lead, Vardhman Hydraulic Hoses Pvt. Ltd.

Pushkar Singh is Digital Marketing Lead at Vardhman Hydraulic Hoses Pvt. Ltd. (Flexihose India), where he has worked for over a year and a half.

More about the author

Have a question this guide didn't answer?

Send us your bore size, pressure and application and we'll recommend the right hose.