SS flexible hose size chart: all fifteen sizes, in one place
From 110 BAR at 6 mm to 10 BAR at 150 mm. Pick a size to see its pressures and bend radius, or use the full table to compare the range.
Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm
Quick answer
Our SS flexible hose pipe comes in fifteen sizes from 6 mm to 150 mm. Braided working pressure falls from 110 BAR at 6 mm to 10 BAR at 150 mm. Test pressure is about 1.5 times working and bursting pressure is 4 times working at every size. Each size also has a static bend radius (S) and a larger flexing bend radius (F).
A specification sheet should let you find your size and read it without phoning anyone. This is ours, for SS flexible hose pipe, taken directly from the FLEXI HOSE Product Catalogue 2026-2027. Use the picker for one size, or the table below it for the range. Then read the short notes on what each column means.
Pick a size
Choose a nominal size. Bars share one scale, so you can see how quickly pressure falls as the bore grows.
6 mm SS flexible hose
- O.D.
- 9.5 mm
- Bend radius S
- 25 mm
- Bend radius F
- 85 mm
- Corrugations / m
- 480
- Braid wires
- 6
- Braid coverage
- 97.10 %
8 mm SS flexible hose
- O.D.
- 12.1 mm
- Bend radius S
- 32 mm
- Bend radius F
- 135 mm
- Corrugations / m
- 440
- Braid wires
- 7
- Braid coverage
- 95.20 %
10 mm SS flexible hose
- O.D.
- 14.2 mm
- Bend radius S
- 38 mm
- Bend radius F
- 145 mm
- Corrugations / m
- 380
- Braid wires
- 8
- Braid coverage
- 96.30 %
12 mm SS flexible hose
- O.D.
- 16.7 mm
- Bend radius S
- 45 mm
- Bend radius F
- 145 mm
- Corrugations / m
- 305
- Braid wires
- 9
- Braid coverage
- 95.00 %
16 mm SS flexible hose
- O.D.
- 21.4 mm
- Bend radius S
- 55 mm
- Bend radius F
- 165 mm
- Corrugations / m
- 275
- Braid wires
- 11
- Braid coverage
- 97.20 %
20 mm SS flexible hose
- O.D.
- 26.3 mm
- Bend radius S
- 65 mm
- Bend radius F
- 175 mm
- Corrugations / m
- 272
- Braid wires
- 10
- Braid coverage
- 95.50 %
25 mm SS flexible hose
- O.D.
- 32.4 mm
- Bend radius S
- 80 mm
- Bend radius F
- 205 mm
- Corrugations / m
- 294
- Braid wires
- 7
- Braid coverage
- 94.60 %
32 mm SS flexible hose
- O.D.
- 41.1 mm
- Bend radius S
- 100 mm
- Bend radius F
- 265 mm
- Corrugations / m
- 273
- Braid wires
- 8
- Braid coverage
- 93.10 %
40 mm SS flexible hose
- O.D.
- 49.2 mm
- Bend radius S
- 130 mm
- Bend radius F
- 305 mm
- Corrugations / m
- 140
- Braid wires
- 9
- Braid coverage
- 92.00 %
50 mm SS flexible hose
- O.D.
- 63.4 mm
- Bend radius S
- 160 mm
- Bend radius F
- 325 mm
- Corrugations / m
- 110
- Braid wires
- 10
- Braid coverage
- 95.20 %
65 mm SS flexible hose
- O.D.
- 80.5 mm
- Bend radius S
- 180 mm
- Bend radius F
- 420 mm
- Corrugations / m
- 107
- Braid wires
- 10
- Braid coverage
- 94.50 %
80 mm SS flexible hose
- O.D.
- 94.8 mm
- Bend radius S
- 200 mm
- Bend radius F
- 450 mm
- Corrugations / m
- 92
- Braid wires
- 10
- Braid coverage
- 93.40 %
100 mm SS flexible hose
- O.D.
- 116.4 mm
- Bend radius S
- 280 mm
- Bend radius F
- 560 mm
- Corrugations / m
- 85
- Braid wires
- 10
- Braid coverage
- 91.00 %
125 mm SS flexible hose
- O.D.
- 150 mm
- Bend radius S
- 320 mm
- Bend radius F
- 730 mm
- Corrugations / m
- 72
- Braid wires
- 10
- Braid coverage
- 88.20 %
150 mm SS flexible hose
- O.D.
- 172 mm
- Bend radius S
- 380 mm
- Bend radius F
- 820 mm
- Corrugations / m
- 69
- Braid wires
- 12
- Braid coverage
- 87.00 %
SS flexible hose size and pressure table
The full table, in the catalogue’s order. Scroll sideways on a phone.
| Size (mm) | O.D. (mm) | Corr. / m | Braid wire | Wires | Coverage % | Bend S (mm) | Bend F (mm) | Working (BAR) | Test (BAR) | Bursting (BAR) |
|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 9.5 | 480 | .25 | 6 | 97.10 | 25 | 85 | 110 | 170 | 440 |
| 8 | 12.1 | 440 | .25 | 7 | 95.20 | 32 | 135 | 100 | 150 | 400 |
| 10 | 14.2 | 380 | .25 | 8 | 96.30 | 38 | 145 | 90 | 130 | 360 |
| 12 | 16.7 | 305 | .25 | 9 | 95.00 | 45 | 145 | 80 | 120 | 320 |
| 16 | 21.4 | 275 | .30 | 11 | 97.20 | 55 | 165 | 70 | 105 | 280 |
| 20 | 26.3 | 272 | .30 | 10 | 95.50 | 65 | 175 | 60 | 95 | 240 |
| 25 | 32.4 | 294 | .30 | 7 | 94.60 | 80 | 205 | 45 | 75 | 180 |
| 32 | 41.1 | 273 | .35 | 8 | 93.10 | 100 | 265 | 40 | 60 | 160 |
| 40 | 49.2 | 140 | .35 | 9 | 92.00 | 130 | 305 | 35 | 50 | 140 |
| 50 | 63.4 | 110 | .40 | 10 | 95.20 | 160 | 325 | 30 | 45 | 120 |
| 65 | 80.5 | 107 | .40 | 10 | 94.50 | 180 | 420 | 24 | 35 | 96 |
| 80 | 94.8 | 92 | .40 | 10 | 93.40 | 200 | 450 | 18 | 25 | 72 |
| 100 | 116.4 | 85 | .50 | 10 | 91.00 | 280 | 560 | 16 | 22 | 64 |
| 125 | 150 | 72 | .57 | 10 | 88.20 | 320 | 730 | 14 | 20 | 56 |
| 150 | 172 | 69 | .57 | 12 | 87.00 | 380 | 820 | 10 | 15 | 40 |
FLEXI HOSE Product Catalogue 2026-2027, section 5.1. Pressure columns confirmed as BAR by the company on 13 August 2026. The catalogue prints bend radius with no unit; millimetres is the only reading that fits the sizes. Braid wire thickness is printed without a unit and is shown as printed.
How to read the pressure columns
- Working pressure is the figure to work to. At 25 mm it is 45 BAR.
- Test pressure is about 1.5 times working. At 25 mm it is 75 BAR.
- Bursting pressure is 4 times working at all fifteen sizes. At 25 mm it is 180 BAR. Never treat it as a usable margin.
Two limits on these numbers. We read them as braided figures, because the table lists braid wire and coverage beside each pressure. An unbraided hose is a different case, explained in SS braided vs corrugated hose. And the catalogue prints no service temperature for this hose, so no temperature derating is published here. If the duty is hot, tell us and we confirm it.
Pressure falls as size rises because a larger diameter puts more load on the wall and the braid at the same pressure. That is why you should read your own row and not the headline figure.
Bend radius S and F: which one applies
BOA Group’s metal hose guide explains that ISO 10380 distinguishes a static radius, for a single movement, from a dynamic radius, for frequent movement or pressure pulses. We read our columns the same way: S for a hose bent once at installation, F for any hose that moves, vibrates or sees pressure pulses in service. A pump connection is an F duty. F is always the larger number.
FLEXI HOSE Product Catalogue 2026-2027, section 5.1.
Going tighter than the listed radius is one of the common causes of early failure. Our metal hose installation guide shows how to route a hose so the bend stays inside it.
Working from an inch size?
Our catalogue prints this hose in millimetres only, so that is what we publish. If your drawing or your old purchase order gives an inch size, send it with the enquiry and we will confirm the matching catalogue size. We would rather do that than print a conversion that does not match what you are replacing.
Size is only part of the specification. The end fittings guide covers the other half, SS 304 vs 321 vs 316L covers the grade, and what an SS flexible hose is covers the terms used here.
SS flexible hose guides
- SS flexible hose pipeSizes, grades and how to enquire
- What is an SS flexible hose?Construction, parts and the names buyers use
- SS braided vs corrugated hoseWhich one a pressure line needs
- SS 304 vs 321 vs 316L flexible hoseChoosing the tube grade
- Stainless steel vs rubber vs PTFE hoseThree answers to one question
- Where SS flexible hoses are usedThe movement problems they solve
- SS hose end fittingsThreaded, welded, flanged and swivel
- Metal hose installation guideSix mistakes that crack a hose
- Types of metal hoseAnnular, helical and stripwound
- SS braided hose HSN code and GST8307.10 and how to read it
- SS flexible hose pipe price in IndiaWhy per-metre quotes differ
Send us the row you are reading
Quote the size, the length between ends and the duty, and we can answer directly. All of these sizes are on the SS flexible hose pipe page. If you are comparing suppliers, our guide to per-metre prices shows which columns to match before comparing quotes.
FAQ
What are the specifications for SS braided hose pipes?
Our catalogue table runs from 6 mm to 150 mm in fifteen sizes, with the tube in AISI 304, 321 or 316L and the braid in AISI 304 or 316L, to EN ISO 10380. Working pressure runs from 110 BAR at 6 mm to 10 BAR at 150 mm, which we read as braided figures.
What is the pressure rating for SS flexible hose pipes?
It depends on size. Our catalogue table, read as braided figures, gives 110 BAR working at 6 mm, 45 BAR at 25 mm, 30 BAR at 50 mm and 10 BAR at 150 mm. Bursting pressure is 4 times working at every size.
What is the difference between bend radius S and F?
S is the minimum radius for a hose bent once and left in place. F is the larger minimum radius for a hose that moves, vibrates or sees pressure pulses in service. At 25 mm our catalogue gives 80 mm for S and 205 mm for F.
What sizes of SS flexible hose are available?
Fifteen nominal sizes: 6, 8, 10, 12, 16, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150 mm. Give the length you need on your enquiry.
Do the pressure ratings change with the steel grade?
Our catalogue prints one pressure table, not a table for each grade. If your duty is near a limit, tell us the grade and the temperature so we can confirm it for that case.
Have a question this guide didn't answer?
Send us your bore size, pressure and application and we'll recommend the right hose.
