Hose selection

This page covers every part of the line. For the hose itself, its bore range, pressure rating and ordering, see the full sand blasting hose specification. View the sand blast hose range What are the parts of a sand blasting machine? A blast line has seven parts between the compressor and the workpiece: the compressor

Abrasive media · Choosing between sand, shot and grit Sand Blasting, Shot Blasting and Grit Blasting: How to Choose The three names get used almost interchangeably, and the media they name behave nothing alike. Sand and grit are angular and cut into a surface; shot is round and peens it. The choice changes the finish,

What size air compressor do I need for sandblasting? Size the nozzle first, then the compressor. Clemco’s published chart puts a 3/16 inch (5 mm) orifice at 45 cfm and a 1/2 inch (12.5 mm) orifice at 338 cfm, both measured at 100 psi at the nozzle. Those two nozzles need a blast line of