Home/ Blog/ SS hose/ Types of Metal Hose: Annular, Helical and Stripwound Explained

Types of Metal Hose: Annular, Helical and Stripwound Explained

Published November 6, 2026 · Updated November 21, 2026

SS hose · Types of metal hose

Types of metal hose: the wall is what makes them different

“Metal hose” covers three quite different products. Two are corrugated and leak-tight. One is wound from strip and mostly used for protection. Knowing which is which avoids an expensive mix-up.

Three forms of metal hose wallAnnular: separate closed rings, the form in the Flexihose catalogue. Helical: one continuous spiral. Stripwound: a metal strip wound and interlocked, which is not fully leak-tight. AnnularClosed rings. In our catalogue.HelicalOne continuous spiralStripwoundWound, interlocked strip
The three wall forms, seen from the side. Drawings are schematic.

Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm

Quick answer

There are three main types of metal hose. Annular corrugated hose has separate closed rings. Helical corrugated hose has one continuous spiral. Both are leak-tight and suit pressure and vacuum. Stripwound or interlocked hose is wound from metal strip, has limited leak-tightness and is used mainly for protection and ventilation. Our catalogue’s hose is annular.

If you are replacing an old hose or reading a foreign drawing, you may meet any of these. Our catalogue lists one of them: our SS flexible hose pipe is annular corrugated. So this guide also covers hose that is not in our catalogue, which is the only honest way to explain the differences.

The first split: corrugated or stripwound

The biggest difference is whether the wall is sealed. BOA Group’s metal hose guide separates them this way: corrugated metal hoses are leak-tight and suit high pressure and vacuum, while strip wound hoses have only limited leak-tightness and are used mainly as protection, ventilation or aspiration hoses.

The three forms side by side.

Annular corrugatedHelical corrugatedStripwound / interlocked
WallSealed tube, closed ringsSealed tube, one spiralMetal strip wound with interlocking edges
Leak-tightYesYesLimited
Pressure and vacuumYesYesNot as a pressure hose
DrainingNo drain path along the ringsDesigns sold as self-drainingNot applicable
Mostly used forGeneral industrial hoseHose where draining or low turbulence mattersProtection, ventilation, conduit
In our catalogueYesNoNo

Sources: BOA Group guide; Hose Master product range on helical draining. Catalogue: FLEXI HOSE Product Catalogue 2026-2027, section 5.1.

Annular vs helical hose

Annular hose has rings. Helical hose has a single spiral, like a screw thread. The spiral gives the medium a path to drain along, which is why Hose Master describes its helical designs as draining and reducing in-line turbulence. Annular rings have no such path.

Annular appears to be the more common form. Penflex’s cycle life comparison says annular hose is used more widely than helical, citing some estimates of around 95 percent of the corrugated metal hose market. Our catalogue specifies annular corrugated hose produced from longitudinally welded tubes, under EN ISO 10380, in 15 sizes from 6 to 150 mm. The full table is in our size chart.

Practically, if a process needs a hose to drain fully, ask about that specifically, because an annular hose may not do it unaided. Tell us the duty and ask whether our hose fits it.

Stripwound and interlocked hose

Stripwound hose, also sold as interlocked hose or flexible metal conduit, is made by winding a profiled metal strip so its edges lock together. That gives it flexibility and good mechanical protection, but the seam is not sealed. Hose Master’s definitions also describe interlocked tubing placed over a metal hose to limit its bending radius.

So do not use it to carry a pressurised fluid just because it looks like metal hose. Equally, do not confuse it with the corrugated tube inside a braided hose. For more on what is inside a braided hose, see what an SS flexible hose is and SS braided vs corrugated hose.

How to tell which one you have

A quick identification on an old hose, if you can see the wall at the end.

  1. LookAt the corrugationsFollow one with your eye around the hose. A closed ring is annular. A line that wanders along the hose is helical.
  2. FeelFor a seamA visible wound seam with interlocking edges means stripwound.
  3. CheckThe old paperworkThe original tag, drawing or purchase order often names the form and grade.
  4. SendA photo and the sizeSend it with the enquiry and we will tell you if we can replace it.

Once the form is settled, the next questions are the steel grade, the end fittings and whether a metal hose suits the job at all, covered in stainless steel vs rubber vs PTFE hose.

If it’s annular, we can help

Send a photo, the size and the duty, and we will confirm whether our annular corrugated SS flexible hose is the right replacement. Before fitting one, read the metal hose installation guide. For how the hose is used, see where SS flexible hoses are used. For paperwork and budgets, see the HSN code guide and price guide.

↑ Back to top

FAQ

What are the types of metal hose?

The main types are annular corrugated, helical corrugated, and stripwound or interlocked. The first two have a sealed wall and carry pressure. Stripwound hose has limited leak-tightness and is used mainly for protection and ventilation.

What is the difference between annular and helical hose?

Annular hose has separate closed rings. Helical hose has a single continuous spiral, which is why some helical designs are sold as self-draining. Annular is the more common form, and it is the form in our catalogue.

What is interlocked metal hose used for?

Interlocked or stripwound hose is used mainly as a protective sleeve, for ventilation and aspiration, or as conduit. It has only limited leak-tightness, so it should not be used to carry a pressurised fluid.

Is flexible metal conduit the same as SS flexible hose?

No. Conduit is usually wound and protects cables. An SS flexible hose has a sealed corrugated tube made to carry a fluid or gas under pressure, usually with a wire braid.

Which type of metal hose does Flexihose make?

Annular corrugated stainless steel hose, produced from longitudinally welded tubes, with or without braiding, according to our catalogue. Helical and stripwound hose are not in our catalogue.

PS

Pushkar Singh

Digital Marketing Lead, Vardhman Hydraulic Hoses Pvt. Ltd.

Pushkar Singh is Digital Marketing Lead at Vardhman Hydraulic Hoses Pvt. Ltd. (Flexihose India), where he has worked for over a year and a half.

More about the author

Have a question this guide didn't answer?

Send us your bore size, pressure and application and we'll recommend the right hose.