Home/ Blog/ SS hose/ SS Braided vs Corrugated Hose: Which One Does Your Line Need?

SS Braided vs Corrugated Hose: Which One Does Your Line Need?

Published November 6, 2026 · Updated November 21, 2026

SS hose · Choosing the construction

SS braided vs corrugated hose: the braid is the whole difference

Both start as the same corrugated stainless steel tube. One gets a wire sleeve. That sleeve decides what pressure the hose can hold, how much it weighs and how freely it moves.

Braided hose holds its length under pressure, unbraided hose stretchesTop: an unbraided corrugated hose growing longer as internal pressure pushes on it, which is drawn as a looping stretch. Bottom: a braided hose of the same size holding its length because the braid carries the load between the two ends. Unbraided: pressure pushes the rings apartBraided: the braid carries the load between the endsLength holds
Why the braid exists. Drawing is schematic and the stretch is exaggerated.

Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm

Quick answer

Choose SS braided hose for any line under pressure, because the braid carries the load and stops the hose growing in length. Choose unbraided SS corrugated hose only for low pressure, vacuum or movement duties where flexibility and low weight matter more. Our catalogue table runs from 110 BAR at 6 mm down to 10 BAR at 150 mm, and it lists braid data beside each pressure, so we read those as braided figures.

“Braided or corrugated?” is a slightly misleading question, because a braided hose is corrugated too. The real choice is whether the corrugated tube needs a wire braid over it. We make both as SS flexible hose pipe, and this guide gives the reason the choice matters, the numbers from our catalogue, and a simple way to decide.

What each one actually is

The two constructions side by side.

SS braided hose pipeSS corrugated hose (unbraided)
BuildCorrugated tube plus stainless steel wire braidCorrugated tube only
TubeAISI 304, 321 or 316LAISI 304, 321 or 316L
BraidAISI 304 or 316L wireNone
Sizes6 mm to 150 mmConfirmed on enquiry
Published pressure110 BAR at 6 mm to 10 BAR at 150 mmConfirmed for your size on enquiry
Also calledSS wire braided hose pipeSS bellow hose, SS corrugated hose pipe
Bought forPressure linesLow pressure, vacuum, movement

Catalogue table: FLEXI HOSE Product Catalogue 2026-2027, section 5.1. It prints braid wire, wire count and coverage beside every pressure, which is why those pressures are read as braided figures.

For the wider picture of what the parts do, see what an SS flexible hose is.

Why the braid carries the pressure

A corrugated tube behaves like a spring. Internal pressure pushes on the rings and tries to open them, so an unrestrained hose gets longer. BOA Group’s metal hose guide states it plainly: at high pressure, the tube’s own pressure resistance is almost negligible, and the braid alone is load-bearing. Tied to the fittings at both ends, the braid takes the reaction force and stops the assembly extending.

That makes the end joint part of the pressure system. A braid only works if it is properly anchored at each end, which is why our guide to SS hose end fittings treats the fitting as part of the hose, not an add-on.

Braid coverage

Coverage is the share of the tube surface the wire covers. Our catalogue prints it for every size, along with the number of wires.

Braid coverage by size6 mm: 97.10 percent, 8 mm: 95.20 percent, 10 mm: 96.30 percent, 12 mm: 95.00 percent, 16 mm: 97.20 percent, 20 mm: 95.50 percent, 25 mm: 94.60 percent, 32 mm: 93.10 percent, 40 mm: 92.00 percent, 50 mm: 95.20 percent, 65 mm: 94.50 percent, 80 mm: 93.40 percent, 100 mm: 91.00 percent, 125 mm: 88.20 percent, 150 mm: 87.00 percent6 mm97.10 %, 6 wires16 mm97.20 %, 11 wires25 mm94.60 %, 7 wires50 mm95.20 %, 10 wires100 mm91.00 %, 10 wires150 mm87.00 %, 12 wires
Braid coverage at six sizes, on a 0 to 100 percent scale.

FLEXI HOSE Product Catalogue 2026-2027, section 5.1.

When to choose braided, and when unbraided

Three questions that settle it for most lines.

  1. Question 1Is the line under pressure?If yes, choose braided. Stop here unless the pressure is very low and the rating has been checked.
  2. Question 2Is it vacuum or low pressure?Unbraided may do, and it is lighter and more flexible. Ask us to confirm for your size.
  3. Question 3Could it be knocked or dragged?A braid also shields the thin corrugations from damage, so an exposed location argues for braid.
  4. ResultSend size, pressure and mediumWe check the construction and the pressure rating for your duty.

BOA’s guide notes that corrugated hose as a type suits both high pressure and vacuum, and ISO 10380 is the standard that covers corrugated hose and assemblies. The difference at high pressure is the braid. That is also the answer to a common search, “are steel braided hoses better?”: better for pressure, yes. Not automatically better for a duty that needs maximum flexibility at low load.

What the numbers look like for braided hose

At 25 mm our catalogue gives 45 BAR working, 75 BAR test and 180 BAR bursting. At 50 mm it gives 30, 45 and 120 BAR. Every size is in the SS flexible hose size chart.

Where “SS bellow hose” fits in

In Indian trade, SS bellow hose usually means annular corrugated stainless steel hose, because the rings look like a bellows. Listings use it for both unbraided and braided hose, so never assume. State “with braid” or “without braid” on the enquiry. A bellows expansion joint is a different component and our catalogue does not list one.

The name also sits close to other hose families. Our guide to the types of metal hose separates annular, helical and stripwound forms, and the HSN code for SS braided hose covers how the same product is described on an invoice.

Say it on the enquiry

Write “braided” or “unbraided” on the enquiry, with size, pressure and medium, and most confusion disappears. Our SS braided and corrugated hose range covers both. Before fitting either, read the metal hose installation guide, because a good hose fitted with a twist in it still fails early.

↑ Back to top

FAQ

Which is better, braided or corrugated hose?

Neither in every case. Braided hose is the choice for pressure, because the braid carries the load and protects the tube. Unbraided corrugated hose is lighter and more flexible, and suits low pressure, vacuum and movement duties.

Are steel braided hoses better?

For a pressure line, yes. BOA Group's metal hose guide says braided metal hose resists many times the pressure of hose without braiding. For a duty that needs maximum flexibility at low load, the extra stiffness and weight of the braid may not be needed.

What is a braided hose pipe?

A braided hose pipe has a sleeve of woven wire or yarn over its inner tube. In an SS braided hose pipe, that sleeve is stainless steel wire over a corrugated stainless steel tube. Note that many hoses sold as braided hose pipe in India are PVC garden hose, which is a different product.

What is an SS bellow hose?

It is an Indian trade name for annular corrugated stainless steel hose. Listings use it for both braided and unbraided versions, so state which one you need when you enquire.

What pressure can an unbraided SS corrugated hose take?

Our catalogue table lists braid wire and coverage beside each pressure, so we read those figures as braided. Ask us about an unbraided rating for your size. We do not publish an estimate.

Do you make double braided SS hose?

Our catalogue does not list a double braid series, so we do not publish figures for one. If your specification calls for it, send us the size and pressure and we will tell you what we can supply.

PS

Pushkar Singh

Digital Marketing Lead, Vardhman Hydraulic Hoses Pvt. Ltd.

Pushkar Singh is Digital Marketing Lead at Vardhman Hydraulic Hoses Pvt. Ltd. (Flexihose India), where he has worked for over a year and a half.

More about the author

Have a question this guide didn't answer?

Send us your bore size, pressure and application and we'll recommend the right hose.