Where SS flexible hoses are used: it comes down to movement
A rigid pipe that moves, or sits next to something that moves, eventually cracks. A short length of metal hose takes that movement. Most uses are a version of that one idea.
Flexihose SS flexible hose pipe: annular corrugated, with or without braiding · tube AISI 304, 321, 316L · EN ISO 10380 · catalogue table, read as braided: 6 to 150 mm, 110 BAR working at 6 mm, 10 BAR at 150 mm
Quick answer
SS flexible hoses are used where rigid metal pipework meets movement: isolating vibration at pumps and compressors, taking thermal movement, and making offset connections to equipment. Manufacturers also list them in HVAC, oil and gas, chemical, food, shipbuilding and machinery work. The movement should reach the hose sideways. Avoid twist, and avoid pushing or pulling along its length.
Buyers rarely search for a metal hose out of curiosity. Something cracked, or a drawing asks for one. This guide lays out the duties SS flexible hose pipe is bought for, and just as usefully, the duties it should not be asked to do.
The three problems it solves
Most uses of a metal hose fall under one of these.
- VibrationIsolating a machine from the lineAt pump, compressor and engine connections, where vibration would otherwise fatigue a rigid pipe or its welds.
- Thermal movementLetting a hot line growUsed with proper anchors, usually arranged so the movement reaches the hose sideways rather than along its length.
- OffsetConnecting across a fixed gapJoining two connection points that are not in line, or a piece of equipment that needs to be moved for service.
In all three, the hose is a short section inside a metal system, not a replacement for the line. If your line needs a hose that people move and coil every day, stainless steel is usually the wrong family, as stainless steel vs rubber vs PTFE hose explains.
The movement has to be the right kind
This is where most misuse starts. Flexline’s selection and installation notes state that the pipe motion must be perpendicular to the hose’s centre line, and that twisting causes failure.
The same notes warn against using a metal hose to compensate for bolt-hole misalignment. So “offset” here means a planned offset with the hose installed for it, not forcing a hose between two flanges that do not meet. Our metal hose installation guide shows how to get this right on site.
Where you will find it
BOA Group’s metal hose guide lists heating, plumbing and air conditioning, oil and gas, chemical and food, machine and equipment building, shipbuilding, railway and automotive work among the uses of metal hose. In practice, the job within each sector is usually one of these:
Typical duties, and what to tell the supplier for each.
| Duty | Typical location | What to check |
|---|---|---|
| Pump and compressor connections | Suction or discharge side of the machine | Length, because the hose needs enough live length to take vibration |
| Process and chemical transfer lines | Fixed plant pipework | The medium, which decides the tube grade |
| HVAC and building services | Chiller and equipment connections | Pressure, and how the hose is supported |
| Gas lines | Equipment connections | The medium and any standard your project requires |
| Marine and coastal plant | Anywhere with salt air | Grade: 316L is better than 304 with chlorides, not immune |
Those are typical examples, not a list of approvals. If your application needs a specific code or authority approval, tell us at the enquiry stage so we can say plainly whether we can meet it.
When it is the wrong choice
- Taps, geysers and washing machines. Those use short consumer connectors, which are not in our catalogue.
- A hose people drag around. Corrugated metal hose is installed and left. Rough handling damages it.
- Taking up a badly fitted flange. Fix the alignment. Don’t ask the hose to do it.
- Large axial movement. Movement along the length of the line is a job for other components. Ask before using a hose for it.
Once you know a hose fits, three things finish the specification: braided or unbraided, the size and pressure and the end fittings.
SS flexible hose guides
- SS flexible hose pipeSizes, grades and how to enquire
- What is an SS flexible hose?Construction, parts and the names buyers use
- SS braided vs corrugated hoseWhich one a pressure line needs
- SS 304 vs 321 vs 316L flexible hoseChoosing the tube grade
- SS flexible hose size chart6 to 150 mm, pressure and bend radius
- Stainless steel vs rubber vs PTFE hoseThree answers to one question
- SS hose end fittingsThreaded, welded, flanged and swivel
- Metal hose installation guideSix mistakes that crack a hose
- Types of metal hoseAnnular, helical and stripwound
- SS braided hose HSN code and GST8307.10 and how to read it
- SS flexible hose pipe price in IndiaWhy per-metre quotes differ
Describe the movement on your enquiry
Tell us what moves, in which direction and how often, along with size, pressure and medium. That lets us check the length as well as the rating for your SS flexible hose pipe. New to the product? Start with what an SS flexible hose is.
FAQ
What are the uses of flexible hoses?
Flexible hoses connect points that move or do not line up. Stainless steel flexible hose is used mainly for vibration isolation at pumps and compressors, thermal movement and offset connections in fixed metal pipework.
What is SS flexible hose used for?
It is used as a short flexible section in metal pipework: at pump and compressor connections, in process and chemical lines, in HVAC plant and at equipment connections. It takes movement that would otherwise crack a rigid pipe.
What is 304 stainless steel pipe used for in a hose?
AISI 304 is the general-purpose tube grade, usually chosen for water, air and oils where chlorides are low. Where chlorides are present, 316L is usually considered first, though it is not immune.
Can SS flexible hose be used for misaligned flanges?
It should not be used to force two misaligned flanges together. Flexline's notes warn specifically against using metal hose to compensate for bolt-hole misalignment. Correct the alignment, or design the offset into the installation.
Can SS flexible hose be used on a steam line?
Our catalogue prints no service temperature for SS flexible hose, so a steam duty has to be checked case by case. Send the steam pressure and temperature. Our steam hose page and steam guides cover the rubber options.
Have a question this guide didn't answer?
Send us your bore size, pressure and application and we'll recommend the right hose.
